Key takeaways
- Compare the best boat seats for bass and jon boats, from folding fishing seats and a molded bucket to a 61-inch bench, with mounting and vinyl tips.
A worn boat seat makes itself known long before you reach your first spot. The vinyl cracks, the foam packs flat, and every wake sends a jolt through your lower back. Replacing the seat is one of the simplest upgrades for a bass boat, jon boat, or small fishing rig, but only if the new seat fits your deck, your mount, and the way you fish.
This guide covers boat-mounted seats only: folding fishing seats, pedestal-ready seats, a molded bucket, and a full bench package. These are not stadium seats and not automotive seats adapted for the water. Every pick bolts to a pedestal, a swivel, a bench top, or a flat deck surface, and uses materials intended to survive sun, spray, and wet clothing.
We compared five seats from five makers: a molded folding seat, an orthopedic high-back, a bare molded bucket, a two-seat folding pair, and a wide bench set. Check bolt pattern and footprint carefully.
Disclosure: As an Amazon Associate, I earn from qualifying purchases.
1. Wise 8WD139LS-012 Molded Fishing Boat Seat
Specs
– Brand: Wise
– Model: 8WD139LS-012, 8WD139 Series
– ASIN: B0000C6EU2
– Color: Grey shell with Grey/Charcoal cushion
– Seat width: 20.25 inches
– Seat depth: 15.5 inches
– Materials: Compression foam, plastic, and vinyl
– Frame: Injection-molded plastic folding frame
– Mounting: BIA standard 4-bolt pedestal system
The Wise 8WD139LS-012 is the straightforward replacement most jon boat owners picture first. It is a molded plastic folding seat with cushion pads on the seat and back, so the shell gives structure and the pads give you something softer than bare plastic. Wise describes the cushions as thick, high-compression foam covered in marine grade vinyl treated for UV and mildew resistance, with an embossed seating surface.
It suits a boat stored outdoors or hosed down often: no deep foam to stay soggy, a wide pan for anglers who shift while casting, and a back that folds for covering or stepping over in a narrow hull. At 20.25 inches wide, measure spacing if two will sit side by side. The pedestal is separate. Choose it for easy cleaning over plush support.
2. Tempress ProBax Orthopedic Folding High Back Boat Seat, Model 68454
Specs
– Brand: Tempress
– Model: ProBax, model 68454
– ASIN: B07M8899TL
– Color: White/Gray/Carbon
– Dimensions: 23.5 inches high x 18.5 inches wide x 19.5 inches deep
– Weight: 14 pounds, per the maker listing for the folding ProBax
– Materials: 30 oz marine grade vinyl, dual-core foam, polypropylene frame
– Mounting: 5.25 x 5.25 inch bolt pattern, mounting bolts included
– Compliance note: ABYC H-31 compliant, per Tempress
The Tempress ProBax is the support-focused pick. Tempress says it was engineered with input from spinal surgeons and ergonomic experts, and it uses a dual-core foam system in the base and back that is firmer where your hips need support and softer where pressure builds. The back is tall for a folding fishing seat, and the shape is contoured rather than flat.
That matters on long days: a flat pad can feel fine for an hour and punishing by the fourth. The ProBax spreads load across the lower back, its no-pinch hinge folds without trapping fingers, and its cover is 30 oz vinyl sewn with UV and abrasion resistant thread over a polypropylene frame with stainless hinge pins. Trade-offs are size and height: a tall seat can raise your center of gravity on a narrow jon boat. It is not compatible with the Tempress Quick Disconnect Kit, per the maker. Pick it if back comfort is the main reason for upgrading.
3. Attwood 98390GY Molded Bucket Seat
Specs
– Brand: Attwood
– Model: 98390GY
– ASIN: B01HGWMC14
– Color: Gray
– Dimensions: 18 inches wide x 21 inches deep x 16 inches high
– Seat depth: 16 inches
– Weight: 2.75 pounds
– Material: One-piece molded high-impact plastic
– Included: Mounting screws
The Attwood 98390GY removes the padding entirely. This is a one-piece molded plastic bucket with a deep, scooped shape that holds you in place when the boat rocks or turns. Because there is no foam and no vinyl cover, there is nothing to absorb water, tear on a hook, or mildew in storage.
That suits dinghies, skiffs, and jon boats left outside. At 2.75 pounds it is the lightest seat here, easy to carry or swap, and its 18-inch width helps on narrow benches. Hard plastic can feel hot in sun and firm over chop, so many owners add a thin cushion for longer outings. Choose it if low maintenance and low weight matter more than cushioning.
4. Leader Accessories Elite Folding Fishing Boat Seat, Pair of 2
Specs
– Brand: Leader Accessories
– Model: Elite, part 2070212
– ASIN: B09QCKRBH6
– Quantity: 2 seats
– Color listed: Red/Charcoal/Black
– Seat depth: 15.5 inches
– Item weight: 21 pounds for the pair
– Materials: Foam, plastic, and vinyl
– Fit: Universal fit, standard mounting pattern for swivels and pedestals
The Leader Accessories Elite set solves a common problem: the driver seat and the front fishing seat are both worn out at the same time. A matched pair keeps height, color, and feel consistent across the boat. Each seat folds, so backs can drop out of the way for casting room or for a boat cover.
Independent store coverage describes the Elite at about 17.5 inches wide by 15 inches deep by 21.5 inches high per seat, with a 5 x 5 inch bolt pattern, waterproof UV-resistant vinyl, and compression foam. Measure your holes rather than trusting any universal claim, and measure for two mounts and enough elbow room. Pick this set to refresh both main seats at once.
5. DeckMate 61-Inch Bass Boat Seats
Specs
– Brand: DeckMate
– Model: DeckMate 61-inch Bass Boat Seats
– ASIN: B019FW8JYC
– Color: Gray and Charcoal
– Overall package width: 61 inches
– Bucket seats: 22 inches wide each, two-piece back and seat cushions
– Center seat: 17 inches wide, folds down and works as a step
– Materials: 30 oz marine grade vinyl, custom molded foam, plastic frames
– Hardware: Stainless steel mounting hardware included
The DeckMate 61-inch package is not a single seat. It is a factory grade replacement bench set for a bass boat: two bucket seats for driver and passenger, plus a 17-inch center seat that folds down and doubles as a step to the rear deck. Each bucket is 22 inches wide and built in two pieces, so back and bottom cushions attach separately, which makes alignment easier than wrestling one large unit into place.
DeckMate uses 30 oz vinyl over custom molded foam, with plastic frames and stainless hardware, which matters because ordinary steel fasteners stain in a wet boat. The listing states a 3-year full replacement warranty. Measure twice: your deck needs 61 inches of usable width, room to fold the center, and a solid surface across the span. It does not suit a narrow jon boat or a single pedestal position.
How to Choose the Best Boat Seats
Start with the mount. Spacing differs: Tempress uses 5.25 x 5.25 inches, the Elite is described with 5 x 5 inches, and Wise mounts to a BIA standard 4-bolt system. Measure your swivel or pedestal holes and confirm a match before drilling.
Next, measure space: width for side-by-side fit, depth for knee clearance, and folded height for a cover. A bench package needs a full-width measurement at deck level.
Then match style to the job. Molded seats drain and clean easily outdoors. High-back padded seats support long sits but add weight and height. Folding backs help where you step over seats or trailer with a cover.
Finally, check materials: marine grade vinyl, foam that will not stay waterlogged, non-rotting frames, and stainless fasteners. Pedestals and swivels are often separate, and a new seat on a corroded swivel wastes the upgrade.
FAQ
Can I put a pedestal seat on a jon boat bench?
Yes, if the bench top is solid and you use a mount made for that seat pattern. Many anglers bolt a swivel or short pedestal plate to the bench, then attach the seat. Keep height low on a narrow jon boat, because a tall pedestal raises your center of gravity and makes the boat feel less stable.
How do I clean marine vinyl boat seats?
Rinse off salt and grit first, then wash with mild soap and water using a soft cloth or brush. Rinse again and let the seat dry fully before covering the boat. Avoid harsh solvents and stiff brushes, which can damage vinyl and stitching, and keep hooks and tools off the cushions.
Do folding boat seats fit any swivel?
No. Folding seats fit swivels that share their bolt pattern. Measure your swivel pattern and compare it with the seat specification before buying. A direct match is stronger, lower, and simpler than stacking adapter hardware under the seat.
When should I replace a whole bench instead of one seat?
Replace the whole bench when base structure, foam, and vinyl have all aged together, or when matching a single new seat to faded originals is impossible. A bench set also renews the center step and all hardware at once. If only one cushion is damaged and the frame is sound, a single seat is the simpler job.
Conclusion
The best boat seat is the one that fits your mount, fits your deck, and fits how long you actually sit. Choose the Wise 8WD139LS-012 for a simple, wide, molded folding seat that cleans easily. Choose the Tempress ProBax if back support is the whole point. Choose the Attwood 98390GY for the lightest, lowest-maintenance bucket. Choose the Leader Accessories Elite pair to refresh two positions at once. Choose the DeckMate 61-inch set when the entire bass boat bench needs replacing.
Measure your bolt pattern and bench width once, write the numbers down, and compare them with the specifications above before you order. That five-minute check turns a good seat on paper into a good seat on your boat.
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialA Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.
See Prime for Young AdultsAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.




