Updated Nov 21, 2026· 7 min read

Key takeaways

  • Compare the best skateboard bearings in standard 608 size, from Bones REDS and Bronson G3 to ceramic and budget sets, plus tips on shields and spacers.

Bearings decide how much speed you keep between pushes. A worn or gritty set makes a good deck and a fresh set of wheels feel slow, while a clean, well-made set rolls longer, holds speed through rough pavement, and needs fewer pushes on the way to a spot. The good news is that every set in this guide uses the standard 608 size, so each one fits standard skateboard trucks and wheels with an 8mm axle.

Our top pick: Bones REDS Skateboard Bearings, 8 Pack. Runner-up: Bronson Speed Co. Aaron Jaws Homoki Pro G3 Bearings.

This roundup covers five bearing sets sold on their own, from five different brands: a long-running all-round favourite, a signature set built for impact resistance, a budget set with removable shields, a colourful sealed set, and a ceramic option. None of these picks is a complete board, truck set, or wheel set — each one is a pack of 608 bearings for your existing wheels. Read the shield, lubricant, and spacer details closely, because they shape how a bearing copes with dust, landing loads, and cleaning.

Disclosure: As an Amazon Associate, I earn from qualifying purchases.

1. Bones REDS Skateboard Bearings, 8 Pack

Bones REDS are the set many skaters measure other bearings against. Bones builds them to its own Skate Rated clearances, tolerances, materials, and lubricant specification rather than leaning on a generic precision label, and the listing notes that they are manufactured in China in a facility dedicated to skate bearings. That skate-specific focus makes REDS a sensible first upgrade from the bearings supplied with many complete boards.

Each bearing uses a single, non-contact, removable rubber shield. That keeps friction low while covering the balls and races, and the shield comes off for cleaning and re-lubrication. The set arrives pre-lubricated with Speed Cream racing lubricant, ready to press into wheels straight from the pack.

Choose REDS for a proven, easy-to-service set for street, park, and cruising. This plain 8-pack does not focus on spacers and speed rings, so reuse your current hardware or add spacers separately if your setup uses them.

Specs
– Brand: Bones
– Set size: 8 bearings
– Bearing size: 608
– Bore: 8mm
– Outer diameter: 22mm
– Width: 7mm
– Material: Alloy steel
– Shield: Single removable rubber shield, non-contact
– Lubricant: Speed Cream racing lubricant, pre-lubricated
– Precision: Skate Rated clearances and tolerances
– ASIN: B000FDRQ1S

2. Bronson Speed Co. Aaron Jaws Homoki Pro G3 Bearings

The Bronson Speed Co. Aaron Jaws Homoki Pro G3 set is a signature version of the G3 platform, with the rider name etched on the outer race. G3 bearings are built around deep groove raceways, where the balls sit deeper in the channel. Bronson presents that geometry as a way to reduce side-impact damage and breakage, which matters for bearings that take repeated landing loads.

The alloy steel bearings come pre-lubricated with high-speed ceramic oil, with straight-edge shields intended to hold oil in while keeping dirt and moisture out. Retailer listings for this signature set describe the same standard dimensions and eight-bearing format, matching the specification sheet for the model.

Pick the Jaws G3 set if impact resistance and a fast factory oil are high on your list. Plan on occasional cleaning and fresh oil if you skate dusty spots often, because light oil favours speed over long, maintenance-free intervals.

Specs
– Brand: Bronson Speed Co.
– Model: Aaron Jaws Homoki Pro G3
– Set size: 8 bearings
– Bearing size: 608
– Bore: 8mm
– Outer diameter: 22mm
– Width: 7mm
– Material: Alloy steel
– Raceway: Deep groove raceway design
– Lubricant: High-speed ceramic oil, pre-lubricated
– ASIN: B096QWY19L

3. Spitfire Cheapshots Skateboard Bearings

Spitfire Cheapshots are the straightforward budget option in this group. Spitfire positions them as a step above basic bearings supplied with entry-level setups, with durable steel races, a sturdy cage, and removable black shields. The shields help keep crud out during daily street skating, and because they come off, the bearings can be cleaned instead of being thrown away at the first sign of grit.

The set uses the standard 608 size with an 8mm bore, so it fits virtually every skateboard truck and wheel combination. The bearings arrive pre-lubricated, and the pack includes eight bearings plus a bighead sticker. Retailers describe Cheapshots as an ABEC-3 precision set of eight designed for all types of skating.

Choose Cheapshots for a low-cost replacement set from an established skate brand, or as a spare set for a second board. The appeal is a standard size, serviceable shields, and an easy fit across almost any setup.

Specs
– Brand: Spitfire
– Model: Cheapshots
– Set size: 8 bearings
– Bearing size: 608
– Bore: 8mm
– Width: 7mm
– Shields: Removable black shields
– Lubricant: Pre-lubricated from the factory
– Precision: ABEC-3 precision
– Extras in pack: Bighead sticker
– ASIN: B00EC9X502

4. Yellow Jacket Premium Skateboard Bearings, Pack of 8

Yellow Jacket Premium bearings stand out first for their coloured seals. Those seals are more than a styling choice: the brand uses them to help protect the inside of the bearing from dirt, rocks, and dust, which can extend service life between cleanings. The pack of eight covers one skateboard, in the familiar 608 dimensions shared by the rest of this guide.

Yellow Jacket describes its premium steel and high-precision manufacturing as the basis for a smooth, fast spin, and its pack-of-eight skateboard listings carry ABEC-9 precision. The bearings arrive pre-lubricated for high speed with low friction, a point repeated in retailer coverage of the Stripes line. Colour varies by variant, so confirm the seal colour on the exact product page before ordering.

Pick Yellow Jacket if you want a sealed, colourful set and a higher stated precision class without moving to ceramic balls.

Specs
– Brand: Yellow Jacket
– Set size: 8 bearings
– Bearing size: 608
– Bore: 8mm
– Outer diameter: 22mm
– Width: 7mm
– Material: Premium steel
– Seals: Coloured seals for dirt and dust protection
– Lubricant: Pre-lubricated
– Precision: ABEC-9 precision
– ASIN: B077F7146C

5. Oldboy Ceramic Skateboard Bearings, Set of 8

Oldboy takes a different material route. Its set uses ceramic balls in the 608RS format, held in a nylon cage, and the brand presents the polished ceramic balls as hard, smooth, and resistant to the scratching and rust that can affect steel balls. Ceramic also generates less friction in this design, which puts this set at the performance end of the guide.

The dimensions stay standard — 8mm bore, 22mm outer diameter, 7mm width — so the bearings fit skateboards and longboards that use 608 bearings. The set of eight arrives pre-lubricated, with extra lubricant intended to reduce wear and help protect against water damage, in the brand’s distinctive pyramid box.

Choose Oldboy if you ride in damp conditions, dislike how quickly steel bearings can corrode, or want to try ceramic balls without changing wheel or truck sizes.

Specs
– Brand: Oldboy
– Set size: 8 bearings
– Bearing size: 608RS
– Bore: 8mm
– Outer diameter: 22mm
– Width: 7mm
– Material: Ceramic balls
– Cage: Nylon cage
– Lubricant: Pre-lubricated
– Package: Pyramid box
– ASIN: B075QLMQW6

How to Choose the Right Set

Start with fit: look for 608 bearings with an 8mm bore, a 22mm outer diameter, and a 7mm width. That is the standard skateboard size, and every set above follows it.

Next, think about shields and service. Removable shields, like those on the Bones and Spitfire sets, make cleaning easier. Tighter coloured seals, like those on the Yellow Jacket set, favour protection from dust and grit. Shieldless designs roll freely but need the most attention, so they suit neither wet streets nor dusty parks.

Lubricant changes the feel too. Light racing oil gives a fast, free spin but needs refreshing more often. Grease lasts longer and protects well, yet can feel slower until it breaks in. Ceramic oil and ceramic balls aim to cut friction further, at a higher cost.

Treat the ABEC number as only one clue. It describes a tolerance class, not how a bearing handles side loads, dirt, or landings. Skate-specific clearances, raceway shape, and shield design often tell you more. Finally, check whether you need spacers: not every plain 8-pack includes them.

FAQ

How many bearings does one skateboard need?
Eight. Each wheel takes two bearings, and a skateboard has four wheels, so every set in this guide covers one complete board.

Can these bearings fit longboard wheels too?
Yes, as long as the wheels and axles use the standard 608 size with an 8mm bore. Most skateboard and longboard wheels do, but check oversized or specialty cores before ordering.

How often should bearings be cleaned?
Clean them when they sound gritty, spin unevenly, or slow down noticeably. Riders on dusty or wet streets will need to clean and re-lubricate more often than riders on smooth, dry park surfaces.

Do spacers make a difference?
Spacers sit between the two bearings inside a wheel and can help the wheel spin freely when the axle nut is tightened properly. They are small, inexpensive, and worth using if your wheels and trucks are set up for them.

Conclusion

For most skaters, Bones REDS remain the safest all-round choice: skate-specific clearances, a removable shield, and proven Speed Cream lubrication in a standard 8-pack. The Bronson Jaws G3 set is the pick for impact-heavy skating, Spitfire Cheapshots cover the budget end with serviceable shields, Yellow Jacket adds coloured seals and ABEC-9 precision, and Oldboy offers a ceramic route for lower friction and better resistance to moisture. Match the shield, lubricant, and spacer setup to where and how you skate, and any of these five 608 sets will be a clear step up from tired bearings.

U
US Sport Update Editorial Team
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Skateboard Bearings: 5 Fast 608 Sets ComparedCheck price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Prime for Young Adults

A Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.

See Prime for Young Adults
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.